Avaya Media Processing Server 500 Hardware Installation And Maintenance page 127

5. To modify the current settings:
a. Select Modify. Press <RETURN> to accept the current values.
For each of the following questions, you can press <Return> to select the value
shown in braces, or you can enter a new value.
How should the board boot?
1. pROBE+ standalone mode
2. pROBE+ waiting for host debugger via serial connection
3. pROBE+ waiting for host debugger via a network connection
4. Run the Application
Which one do you want? [4]
NETWORK INTERFACE PARAMETERS:
Do you want a LAN interface? [Y]
BOOTP, RARP or FIXEDIP can obtain this Board's IP.
The default method is BOOTP
Enter Y to change the default [N] y
Enter 0 for RARP, 1 for BOOTP, 2 for FIXED [1] 1
New configuration is: BOOTP
Use a subnet mask for the LAN interface? [N]
Should there be a default gateway for packet routing? [N]
HARDWARE PARAMETERS:
Baud rate for serial channels [9600]
Do you want to change the board's clock rate? [N]
Do you want to change the SWT status? [N]
Do you want to change the board's Ethernet address? [N]
ROM BOOTLOADER PARAMETERS:
STARTUP DELAY:
How long (in seconds) to delay before starting up? [5]
b. To change the value of an item, enter the new value after the prompt. Continue until the
boot is complete.
6. The original verify screen displays the new values.
7. To make additional changes, select Modify. To save the changes and boot, select Continue.
The TMS boots, and shows the following screen output.
----------------------------------------------------
(M)odify any of this or (C)ontinue? [C]
Writing the modified parameters to the removable EEprom
Starting the TFTP download...
........................................................
........................................................
TFTP download completed...
Transferring control to the downloaded code.
TMS_860.elf, Release 1.0.0.67 [06/08/00 12:27:13 PM]
Copyright (C) 2000, Avaya Incorporated
Chassis: 04Backplane Slot Number: 04
Available Processor Memory:
Connecting to Host 192.168.212.2 (port#5500)....ESTABLISHED
Detecting Cards:
Card Revision
-----------------------------------------------
5036484011_
5036484011_
503643701E_.503643601B_ 4
Loading FPGAs:
Loading TMS-2500 in slot 0, card 0 with TMS484a.sm
...................................................
October 2014
26MB
SlotCardType
0 0 TMS-2500
0 1 MDM/TMS-2500
0 DCC-2000-T1
Avaya Media Processing Server 500 Hardware Installation and Maintenance
Comments? infodev@avaya.com
TMS Boot ROM
127