Table of Contents
Advertisement
Configuration (Part I)
Temperature Status (degrees Celsius):
Critical Temp.
Low Temperature
Current Temp.
PowerFail Log:
3. Run the reload command to restart the system. Check that the underlined entries in the
following sample are shown in your output.
InReach:0 >>reload
Do you really want to proceed? y/n y
Restarting System!...
Please wait for system to restart..
INIT: Switching to runlevel: 6
InReach:0 >>
Disconnected
Restarting system
1.1.0 (Jul 9 2003 - 11:03:10)
CPU Test Passed
LX-4016 (Copperhead) 16-port unit
The system is running on DC
Warning: DC_B bit is set in CPLD System Fail Status Register
No system failures were discovered
CPLD Test Passed
FEC Test Passed
CD1400 device number: 1 passed test
.............................................................
Welcome to In-Reach Linux LX Server
Mounting proc filesystem
INIT: Entering runlevel: 3
Starting crond
Starting watchdog timer
System initialization
Modem detected on /dev/ttyS2 port 17
Serial port initialization
Virtual port initialization
Interface initialization
Subscriber initialization
Ethernet port initialization
Restoring the configuration
Generating registry
Using /config/Config.prm for initial configuration
Configuring from 10.7.200.1 lx000207 /config/Config.prm
Setting Resolver & Gateway
Setting Ip
................
Welcome to MRV Communications, In-Reach Product Division.
Port 0 Speed 9600
Login: InReach
Password: ******(access)
InReach:0 >enable
Password:******(system)
Checking the Configuration Files
To check the configuration files, start the Linux shell and get a listing of the /config directory. Verify
that M_startppp and M_pppopts are present.
InReach:0 >>shell
BusyBox v0.60.1 (2003.07.09-15:14+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
In-Reach:/# cd /config
Avaya Media Processing Server 500 Hardware Installation and Maintenance
96
:
60.0 Hysteresis Temp :
:
0.0 Threshold Temp. :
:
31.5
Comments? infodev@avaya.com
5.0
55.0
October 2014
Advertisement
Table of Contents
