Table of Contents
Advertisement
Configuration (Part I)
4. Make the initial login.
a. Enter InReach in the username box.
b. Enter access as the password.
c. Click on the Login button.
5. Make changes in admin mode.
a. Select ADMIN at the top of the screen.
b. Enter the system root password.
c. If you are not in admin mode, you cannot make changes and most parameters appear
shaded.
Note:
You cannot make Ethernet changes through the web browser interface. Use the
diagnostic port.
6. Set up the Async ports.
Select the Ports menu on the left and click Async. The following window appears.
Avaya Media Processing Server 500 Hardware Installation and Maintenance
84
Comments? infodev@avaya.com
October 2014
Advertisement
Table of Contents
