Mitsubishi Electric MELSEC iQ-R Series User Manual page 604

Network settings
Set the module parameters (network).
APPX
602
Appendix 2 Motion Module Programs
(3) (2)
(4)
1.
From the [Navigation window], select [Parameter]
(1)
[Module Information][Module model name
Parameter (Network)] to display the parameter editor.
Select "Basic Settings""Network Configuration
Settings""Detailed Setting", then click the [...] button (1).
*1: The model name of the set Motion module is displayed.
2.
The "CC-Link IE TSN Configuration" screen is displayed.
From [Module List][CC-Link IE TSN Device (Mitsubishi
Electric Corporation)]"General-Purpose AC Servo",
select a servo amplifier and drag and drop it into its
assigned position.
3.
Place a check in the Motion Control Station (2) check box
for each set servo amplifier.
*: If the Motion Monitor Station is not displayed, click the [Detailed Display]
button (3) to switch to the detailed display.
4.
Check the IP Address (4) that is assigned to the set servo
amplifiers.
*: The IP Address (4) setting is required when creating an axis to set with the
Motion Control Setting Function.
5.
When the network configuration is complete, select [CC-
Link IE TSN Configuration][Batch Setting of PDO
Mapping] from the menu.
*1
][Module