Mitsubishi Electric MELSEC iQ-R Series User Manual page 509

Data delete
■Format
Command delete
Argument 1 • Specify the data path of the delete target.
• Wild card characters (*: arbitrary character string, ?: arbitrary single character) enable specification of multiple data.
• All data including the specified folder (including the data in the sub directory as well) is deleted by specifying the folder.
• Writing permission to the file is required.
Argument 2 • Specify whether the output to the log file is enabled.
• Note that the argument 2 must not be specified to output the log.
• Not to output the log, specify "nolog".
■Writing example
• Delete the Parameter.csv of "/rom/$MOTPRJ$/param/" folder.
delete /rom/$MOTPRJ$/param/Parameter.csv
Environmental variable specification
■Format
Command pathset
Argument 1 • Specify the environmental variable.
• For details of the environmental variable to be specified, refer to the following.
Page 500 Environmental variables
• The specified environmental variable has been enabled until the power ON/reset or the software reset of the motion area.
Argument 2 • Specify the file/folder path to be set to the environmental variable.
• Specify "/cpu" to use the data of the CPU module.
• Wild card characters (*: arbitrary character string, ?: arbitrary single character) enable specification of multiple data.
Argument 3 • Specify whether the output to the log file is enabled.
• Note that the argument 3 must not be specified to output the log.
• Not to output the log, specify "nolog".
■Writing example
• Specify the root path to the "/sdc/$MOTPRJ$/" folder.
pathset PROJECT_ROOT /sdc/$MOTPRJ$/
19 FILE CONTROL
19.2 File Transfer Function
19
507