Mitsubishi Electric MELSEC iQ-R Series User Manual page 534

Warning Error
code (System/
(Hexade axis/axes
cimal) group)
0D2DH Axis/Axes
group
0D2EH Axis/Axes
group
0F00H System
0F01H System
0F02H System
0F03H System
0F04H System
0F05H System
0F06H System
0F07H System
22 TROUBLESHOOTING
532
22.4 List of Warning Codes
Warning name Error detail and cause
Out of Position The value is out of range for
Command Range "AxisName(AxesGroupName).Cd
Warning .Unit_Position".
Out of Speed The value is out of range for
Command Range "AxisName(AxesGroupName).Cd
Warning .Unit_Velocity".
Soft Reboot Disabled Soft reboot was executed when
Warning "System.PrConst.SoftRebootEna
ble" is "Disable".
Log File Create An error has been detected when
Disabled Warning updating log file.
File Error • The parameter content is
broken.
• Major version is unsupported.
Position Data History An error has been detected when
Update Disabled updating position data history.
Warning
File Transfer Command Failed to get address of
Acquisition Disabled "System.Cd.FileTransfer_Comma
Warning nd".
Event Filter Set Failed • Addon MotionEventHist is
Warning disabled.
• The memory capacity of addon
MotionEventHist is insufficient.
File Transfer Parameter • Failed to access to FRAM
Import Failed Warning area.
• The compatibility does not exist
in the version of file transfer
parameter.
• The CRC value of file transfer
parameter is abnormal.
Event History The value is out of range for
Parameter Incorrect "System.PrConst.EventHistoryM
Warning otion_Path" and
"System.PrConst.EventHistoryM
otion_Capacity".
Detection Operation at
timing (At warning occurrence
start/
during
control
At power Operates as "pulse".
ON
At ready
ON
At power Operates as "s".
ON
At ready
ON
When Not execute soft reboot.
executing
software
reboot
When The log file is not
executing created.
file transfer
function
When The file is not imported.
importing
file
When The position data history
updating is not updated.
positioning
data history
file
At system Cannot execute the file
start transfer of the command
label.
When Continues the operation
updating by the disabled filter
filter setting setting.
At system "System.PrConst.FileTra
start nsfer_LogCapacity"=0,
and continues the
operation by disabled
read/write (00000) of
other acess control.
At system Operates by the label
start default value.
Remedy
Set
"AxisName(AxesGroupN
ame).Cd.Unit_Position"
within the range.
Set
"AxisName(AxesGroupN
ame).Cd.Unit_Velocity"
within the range.
Set
"System.PrConst.SoftRe
bootEnable" as
"Enable".
• Delete unnecessary
files to secure the free
capacity.
• Format Target Drive.
• Delete log file.
Please check the
detailed information
(parameter information)
and parameter settings.
• Delete unnecessary
files to secure the free
capacity.
• Format Target Drive.
Delete position data
history.
• Please check the
memory capacity of
addon
MotionEventHist.
Start the system again.
Please check the
memory capacity of
Addon MotionEventHist.
Enable addon
MotionEventHist.
Start the system again.
Set
"System.PrConst.Event
HistoryMotion_Path" and
"System.PrConst.Event
HistoryMotion_Capacity"
within the range.