Output Operation Management
Making Sure to Verify the Setting for the Amount Remaining Every Time the Media Is Changed
SET LENGTH
Set to display
0.0 m
Procedure
Press
MENU
SHEET REMAIN
SHHET REMAIN
AUTO DISPLAY
AUTO DISPLAY
DISABLE
W XXXmm
SETUP SHEET
ROLL
Description
Setting this menu to "ENABLE" can keep you from forgetting to redo the setting when you change the media.
Be sure, however, also to set the [SHEET TYPE] menu (refer to P. 123, "Using Transparent or High Gloss Media")
to "OPAQUE." When [SHEET TYPE] is set to "CLEAR," [SHEET REMAIN] is not displayed automatically.
6
Default Setting
[AUTO DISPLAY]: DISABLE
138
every time when a media is changed.
25.0 m
.
Press
Press
Press
Press
ENABLE
Press
If you set to "ENABLE," you must set the [SHEET TYPE] menu to
"OPAQUE"
P. 123, "Using Transparent or High Gloss Media"
Press
original screen.
several times to display the left figure.
and then
.
.
to select "ENABLE".
to enable the setting.
in this order to go back to the