Making Sure To Verify The Setting For The Amount Remaining Every Time The Media Is Changed - Roland TrueVIS VG-640 User Manual

Output Operation Management
E
Press [ ] or [ ] to set the current amount of media remaining.
SET LENGTH
0.0m
F
Press [ENTER] to confirm your entry.
G
Press [MENU] to go back to the original screen.
W1200mm Ｌ 25.0m
This display is updated.
SETUP SHEET
ROLL
If media has not been loaded,
the set value flashes.
Description
If you cancel media loading, for example by removing the media or raising the loading lever, the amount
remaining at that time flashes on the screen. Because the amount of media remaining is not updated auto-
matically when you change the media, redo the setting whenever you change the media. You can also set the
machine to display this menu automatically whenever you change the media. See the next section, "Making
Sure to Verify the Setting for the Amount Remaining Every Time the Media Is Changed."
Note: The remaining amount that is displayed is only an estimate, and its accuracy is not guaranteed.
5

Making Sure to Verify the Setting for the Amount Remaining Every Time the Media Is Changed

Set the machine to display the amount of media remaining every time the media is changed.
Procedure
A
Press [MENU].
B
Press [ ] several times to display the screen shown below.
MENU
SHEET REMAIN
C
Press [ ], then [ ] to display the screen shown below.
SHEET REMAIN
AUTO DISPLAY
160
25.0m
Ｌ 25.0m