Making Sure To Verify The Setting For The Amount Remaining Every Time The Media Is Changed; Time The Media Is Changed - Roland XR-640 User Manual

Output Operation Management

Making Sure to Verify the Setting for the Amount Remaining Every Time the Media Is Changed

Set to display
Procedure

Press

MENU
SHEET REMAIN

SHEET REMAIN
AUTO DISPLAY

AUTO DISPLAY
DISABLE

Press
Description
Setting this menu to "ENABLE" can keep you from forgetting to redo the setting when you change the media.
Be sure, however, also to set the [EDGE DETECTION] menu (refer to
ABLE." When [EDGE DETECTION] is set to "DISABLE," [SHEET REMAIN] is not displayed automatically.
5
Also, when sheet media is loaded (that is, when [SETUP SHEET] is set to "PIECE"), the setting for the amount
of remaining media is made automatically, and so this menu is not displayed.
Default Setting
[AUTO DISPLAY]: DISABLE
148
SET LENGTH
every time when a media is changed.
0.0 m 25.0 m
.
Press
Press
Press
Press
Press
ENABLE
Press
If you set to "ENABLE," you must set the [EDGE DETECTION] menu to "EN-
ABLE."
 P. 115, "Using Transparent Media"
in this order to go back to the original screen.
twice to display the left figure.
.
twice.
.
to select "ENABLE".
to enable the setting.
P. 115, "Using Transparent Media"
) to "EN-