Output Operation Management
Making Sure to Verify the Setting for the Amount Remaining Every Time the Media Is Changed
Set to display
Procedure
Press
MENU
SHEET REMAIN
SHEET REMAIN
AUTO DISPLAY
AUTO DISPLAY
DISABLE
Press
Description
Setting this menu to "ENABLE" can keep you from forgetting to redo the setting when you change the media.
Be sure, however, also to set the [SHEET TYPE] menu (refer to P. 95, "Using Transparent Media") to "OPAQUE."
When [SHEET TYPE] is set to "CLEAR," [SHEET REMAIN] is not displayed automatically.
5
106
SET LENGTH
0.0 m
25.0 m
.
Press
Press
Press
Press
Press
Press
ENABLE
If you set to "ENABLE," you must set the [SHEET TYPE] menu to "OPAQUE."
P. 95, "Using Transparent Media"
to go back to the original screen.
every time when a media is changed.
to display the left figure.
.
twice.
.
to select "ENABLE".
to enable the setting.