Ntp 118-3: I-010G-A Indoor Ont With Power Supply; Ntp 118-4: I-010G-A Indoor Ont Connections - Alcatel-Lucent 7302 Information Manual

Power cable
connector
AC/DC power
connector
7 Connect the power converter to the ONT. On the I-010G-A indoor ONT, the power
connector is located at the back of the ONT; see Figure
8 Verify that the unit is powered. If there is no power, press the On/Off button.
9 Route the data cable to the RJ-45 Ethernet port at the back of the ONT; see Figure
NTP
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
Figure NTP 118-3: I-010G-A indoor ONT with power supply
Figure NTP 118-4: I-010G-A indoor ONT connections
SC/APC Ethernet (GE)
connector
Shutter
118-5.
NTP 118 — Install an I-010G-A indoor ONT
Power
RJ-45 connector
On/Off push button
November 2013
19840
NTP 118-4.
19833
NTP 118-5