Media Local Network Profile; Media Local Network Profile Provisioning Parameters - Alcatel-Lucent 7302 Information Manual

Parameter Description
auto_connect_ti This parameter is a string containing
mer either a non-negative integer value
or the text use_timed_release. If this
parameter has an integer value it
will govern how long the device waits
before resuming a held remote call
when an active remote call goes
on-hook. If the value
use_time_release is selected and the
timed_release parameter has a value
of 0, this timer is set to 10 seconds.
(4 of 4)

Media local network profile

Table
is yes, then TL1 can be used to configure equivalent parameters on systems
supporting OMCIv2.
Table 5-13 Media local network profile provisioning parameters
Parameter Description
codec An audio format name, chosen from
among the audio MIME types
registered with the IANA (many of
which are listed in RFC 3555). More
than one codec setting may appear in
the provisioning data; the sequence
of all such codec setting values, in
descending order of q value, is used
by the user agent to create an
ordered list of codec formats sent in
an initial offer and is used to define
the order of formats sent in an
answer. The audio/telephone-event
format specified by RFC 2833 is
implicitly included by the user agent
in all offers, and in all answers to an
offer that includes that format, and
thus a setting including that format is
never required. The following codec
values are supported:
•
audio/PCMA (for G.711 A-law)
•
audio/PCMU (for G.711 Mu-law)
•
audio/G726-32 (forG.726-32)
•
audio/G722 (for G.722)
•
audio/G723 (for G.723)
•
audio/G729 (for G.729)
Other values are silently ignored.
These values are case insensitive.
The default value is "audio/pcmu".
(1 of 5)
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
5-13 lists the media local network profile parameters. When OMCIv2 support
Mode Mode Device
1 2
N Y Package
A, B, H
only
Mode Mode Device
1 2
Y Y All
audio/G
722 and
audio/G
723
values
are only
support
ed on
Package
L ONTs
only
November 2013
5 — VoIP overview
OMCIv2 TL1 or CLI
support? parameters
No, value N/A
is derived
from
timed_rel
ease XML
value
OMCIv2 TL1 or CLI
support? parameter
Yes TL1 using
COCEC1ST,
CODEC2ND,
CODEC3RD,
CODEC4TH using
ent-profile-voip
media
CLI using
codec1st,
codec2nd,
codec3rd,
codec4th
using
configure voice
ont
voip-media-prof
5-39