Ntp 130 — Install An I-010G-U Indoor Ont; Ntp 130-1: Hardware Parts Required For Ont Installation - Alcatel-Lucent 7302 Information Manual

Intelligent services access manager

Hide thumbs Also See for 7302:

Table of Contents

NTP 130 — Install an I-010G-U indoor

This NTP provides the steps to install the I-010G-U indoor ONT at the subscriber

Prerequisite

Ethernet cables must be installed at the subscriber residence.

AC/DC power converter

Mounting screws (for wall

mounting the ONT)

Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02

3FE 55873 AAAA TCZZA

ONT Product Information Guide

describes the hardware parts that are required to install an I-010G-U

Table NTP 130-1: Hardware parts required for ONT installation

The power converter converts ac power to 12 V dc power.

Two screws are required with the following features:

pan head style of screw head

screw size of M4 or #6

These screws are not supplied by Alcatel-Lucent.

November 2013