Connectors On A B-8112-A; B-8102-A And B-8112-A Business Ont Connections - Alcatel-Lucent 7302 Information Manual

11 — B-8102-A and B-8112-A unit data sheet
Fiber storage
tray
SC/APC fiber
connector
(Optional)
Class 1 power and
fiber conduit box
Table
Connection
Craft port
Data, IP video, and
VoIP connection
DS1/E1 connection
PON optical
connection
POTS connection
(1 of 2)
11-6 November 2013
Figure 11-3 Connectors on a B-8112-A
11-4 describes the business ONT physical connections.
Table 11-4 B-8102-A and B-8112-A business ONT connections
Function
This connection is used for the management of the business ONT unit.
This connection is provided through the Ethernet RJ-45 connector or the IDC
type connector for connection to 4-pair Ethernet lines. One Ethernet
connection is supported, which can carry data, VoIP, and overlaid IP video
services.
The RJ-48C DS1/E1 connection support structured, unstructured, and
fractional DS1/E1.
This connection is provided through an SC/APC connector or an OptiTap/APC
connector for the physical interface to the PON.
This connection is provided through RJ-11 ports and either screw-down
terminals or IDC connectors, depending upon the model.
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Craft port
Power and alarm
connector
INPUT RATING: DC
45V 55V 1.0A
CRAFT
1
BLK
2
PWR
LINE
1
3
BTRY
LINE
2
4
T
FAIL
LINE
3 R
VIDEO
LINE
4
5
DATA
LINE
5
6
NTWK
LINE
6
7
MGMT
INTF
LINE
7
POTS
LINE
TELCO ACCESS TELCO ACCESS
8
ETHERNET
1
DS1
THIS DEVICE IS INTEDED TO BE
ATTACHED TO A RECEIVER THAT IS
NOT USED TO RECEIVE OVER-THE0AIR 1
BROADCAST SIGNALS. CONNECTION OF
THIS DEVICE IN ANY OTHER FASHION
MAY CAUSE HARMFUL INTERFERENCE
TO RADIO COMMUNICATION AND IS
IN VIOLATION OF THE FCC RULES,
PART 15.
2
VIDEO
DS2
F-type
coaxial
GND
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
POTS screw
type block
POTS ports
(RJ-11)
Ethernet port
(RJ-45)
DS1/E1 port 1
(RJ-48C)
DS1/E1 port 2
(RJ-48C)
18885