Identity Data; Identity Provisioning Parameters - Alcatel-Lucent 7302 Information Manual

Notes
(1) This parameter can only be set on an ONT-wide basis when the parameter is configured as part of the configuration profile
(FTP download).
(2) Does not apply to package C, D, and E ONTs and MDUs
(3)
For the I-240W-S ONT, the RegistrarRoute or RegistarRouteSec must be set the same as OutboundProxy or
OutboundProxySec.

Identity data

Table
used to configure equivalent parameters on systems supporting OMCIv2.
Parameter Description
address_of_reco Mandatory parameter that is the SIP
rd address of record (AOR) for the POTS
line. This is a string of up to 99
AddressOfRecor
characters and is a required
d
parameter. The FTP XML name of
this parameter is shown as
AddressOfRecord.
When the string autofill is used, this
keyword substitutes a new address of
record, taking the form:
sip:CLIENTID +
PORT#@registrar_host,
where
CLIENTID is the TL1 and OMCI
configured value for CLIENTID
PORT# is the numeric port value,
from 1 to n, where n is the numeric
port number for the POTS line
registrar_host is the filled value of
the registrar_uri parameter.
Autofill is not supported on some
devices. Contact your support
representative for more information.
The CLIENTID and PORT# values are
concatenated, with no white space
or other delimiters between them.
realm A realm identifier that corresponds
to the service provider domain in
which the POTS line is registered.
The realm identifier is used in the
authentication of the user agent.
This is a string of up to 99 characters
and is an optional parameter. The
default is to use the realm parameter
from the 401/407 authentication
challenge.
Some devices use an SS 401 response.
Contact your support representative
for more information.
(1 of 3)
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
5-11 lists the identity data. When OMCIv2 support is yes, then TL1 can be
Table 5-11 Identity provisioning parameters
Mode Mode Device
1 2
Y Y All
Y Y All
except
package
C, D,
and E
November 2013
5 — VoIP overview
OMCIv2 TL1 and CLI
support? parameters
Yes, User part
address is configured in
constructe TL1 using
d using USERAOR using
user part ed-ontvoiceport
is and host sip
part
Host part
parameter
configured in
s.
TL1 using
AORHOSTPRTPR
OFID using
ent-ontsip-confi
g
CLI using
user-aor using
configure voice
ont
voice-sip-port
aor-host-prt-pro
f or using
configure voice
ont sip-config
Yes, Defined in
defined in authentication
authentic security method
ation REALM using TL1
security using
method. ed-ontvoiceport
In TL1 sip
length is
CLI using realm
up to 25
using
characters
configure voice
.
ont
voice-sip-port
5-33