Procedure 6-20 To Check The Status Of Leds - Alcatel-Lucent 7302 Information Manual

Intelligent services access manager

Hide thumbs Also See for 7302:

Table of Contents

6 — ONT management using an ONT interface

Procedures using CLI interface

The following procedure provides the steps to check the status of the ONT LEDs

using the CLI interface.

Procedure 6-20 To check the status of LEDs

Choose option 8, More options, from the

Choose option 6, Retrieve ONT LED status, from the secondary menu.

The ONT LEDs appear with their color, current LED state, and previous LED state

shown. For example:

In print_led_states

===================================

press enter key to continue...

LED is the mnemonic for an LED on the ONT. Each LED represents a condition or activity on the

ONT, such as the condition of the battery or the activity of a data link; see Table

explanation of each LED.

COLOR is the color of the LED. The color of the LED represents the status of a condition or activity

on the ONT, such as red for failing battery or green for activity on the data link; see ONT-specific

unit data sheet for the meaning of a color for a specific LED and ONT type.

CURSTATE represents the current LED state, where OFF means the LED is not lit, ON means that

the LED is lit and the color is solid.

PRESTATE represents the previous state of the LED, where OFF means that the LED was not lit,

and ON means that the LED was lit and the color was solid.

Press ↵ to continue.

Choose option 11, Return to main menu, to return to main menu.

STOP. This procedure is complete.

November 2013

Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02

Secondary menu

3FE 55873 AAAA TCZZA

ONT Product Information Guide