NTP 157 — Install an I-211M-H indoor
Purpose
This NTP provides the steps to install an I-211M-H indoor ONT.
General
The DLPs listed in this NTP describe mounting and cabling for the I-211M-H indoor ONT.
Prerequisites
See the listed DLPs for prerequisites.
Recommended tools
You need the following tools for the installation:
Phillips screwdriver
•
TELCO 216 tool for securing either pin-in-hex bolts or 216 tamper-resistant screws
•
electrician's knife
•
wire strippers
•
RJ-11 and RJ-45 cable plug crimp tools
•
voltmeter or multimeter
•
•
optical power meter
drill and drill bits
•
pencil
•
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA
Edition 01
ONT Product Information Guide
ONT
November 2013
NTP 157-1