To Access The Http Interface Using The First Ethernet Port; To Disconnect From The Http Interface; Login Screen - Alcatel-Lucent 7302 Information Manual

6 — ONT management using an ONT interface
The following procedures provide the steps to access and to disconnect from the
HTTP interface using the first Ethernet port.
Procedure 6-1 To access the HTTP interface using the first Ethernet
port
1 Connect a computer or laptop with an HTTP client to the first Ethernet port on the
ONT using an Ethernet cable.
2 Open a Web browser and enter the IP address of the ONT in the Address bar:
http://192.168.4.254↵
The login screen appears, as shown in Figure 6-5.
3 Type a User name and Password in the login screen, and click on OK.
The Web-Management System window opens; see Figure 6-1.
4 STOP. This procedure is complete.
Procedure 6-2 To disconnect from the HTTP interface
1 Close any open window.
2 Disconnect the computer or laptop from the first Ethernet port.
3 STOP. This procedure is complete.
6-12 November 2013
Figure 6-5 Login screen
Note — The HTTP interface requires a specific username and
password. Contact your Alcatel-Lucent technical support representative
for username and password information.
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide