Procedure 6-26 To Reboot An Ont - Alcatel-Lucent 7302 Information Manual

6 — ONT management using an ONT interface
4 Click on one of the following buttons to reboot the ONT:
•
•
The reset ONT dialog box opens, as shown in Figure 6-24.
5 Click on the Reset button to reboot the ONT.
The status bar appears a message after the ONT is rebooted successfully.
6 STOP. This procedure is complete.
Procedures using CLI interface
The following procedure provides the steps to reboot an ONT using the CLI
interface.

Procedure 6-26 To reboot an ONT

1 Choose option 8, More options, from the
appears.
2 Choose option 7, Reboot an ONT, from the secondary menu.
The current state of the download appears. For example:
Software Download: State = Complete
press enter key to continue...
where the download states are described in Table
Press ↵ to continue.
3
4 Choose option 11, Return to main menu, to return to main menu.
5 STOP. This procedure is complete.
Procedures using HTTP interface for Package C ONT
The following procedure provides the steps to reboot an ONT using the HTTP
interface for Package C ONTs.
6-42 November 2013
Force reset—to reboot the ONT immediately regardless of the download state
of the ONT
Graceful reset—to reboot after an ongoing software download is complete
Figure 6-24 Reset ONT dialog box
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Main menu. The Secondary menu
6-10
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide