To Trace In Logging Mode From The Cli Interface - Alcatel-Lucent 7302 Information Manual

6 — ONT management using an ONT interface
From the HTTP interface, you can collect trace statements in a log file that you can
view on-line as follows:
1 Specify the traffic to log, and enable tracing.
2 Specify the action for the system to take when the trace log is full.
3 Disable tracing.
4 Specify the trace log to view.
From the CLI interface, you can view trace statements in real time, or collect trace
statements in a log file that you can copy to a TFTP server. To view trace statements
in real time from the CLI interface:
1 Specify the traffic that you want to view in real time.
2 Enable real-time tracing.
Press ↵ when you are finished.
3

To trace in logging mode from the CLI interface:

1 Specify the traffic that you want to log.
2 Enable tracing.
3 Specify the action to take by the system when the trace log is full.
4 Disable tracing.
5 Copy the trace log to a TFTP server.
This section shows you how to:
•
enable tracing
•
disable tracing
•
retrieve the trace log
Prerequisites
The prerequisites are:
•
The user access level of the ONT is read-write.
•
The ONT is connected to the GPON.
•
The ONT is activated with its services.
•
The steps to access the interface are completed.
•
•
•
6-44 November 2013
Note —
As tracing affects the performance of an ONT, ensure that
you disable tracing when you are finished.
See Procedure 6-1 for HTTP interface using the first Ethernet port.
See Procedure 6-4 for CLI interface using the first Ethernet port.
See Procedure 6-6 for HTTP interface for Package C ONTs
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide