Sip Service Features - Alcatel-Lucent 7302 Information Manual

5 — VoIP overview

SIP service features

Table
supported by the two SIP modes and whether the service feature is configurable
using TL1 via OMCIv2. Not all features are supported for all SIP application servers.
Service
Basic call
Emergency number (911)
(1) (2)
Call forwarding status
indications (1)
Call hold (ANSI) (1) (2)
Call hold (ETSI)
(1)
Reverse polarity (ETSI)
Tone of death (ETSI) (1) (2)
HF using INVITE (1)
Call transfer
Call park (1) (2)
Call waiting (ANSI) (1) (3)
Call waiting (ETSI) (3)
(1 of 3)
5-10 November 2013
5-2 lists the SIP service features on package A, B, and H ONTs and MDUs
Table 5-2 SIP service features
Description
Basic calling functions
Basic 911 support
Enhanced 911 support
Denial of feature use
Emergency ringback
Forced hold
Splash ring when a call is actually
forwarded (2)
Stutter dial tone while call forwarding is
active
Implicit call forward status indicators for
FS 5000 softswitch cannot be configured
using TL1.
Basic hold (flash hook supported)
Remote hold/network hold
Basic hold (flash hook supported)
(1)
Remote hold/network hold
—
—
For FS 5000 softswitch interoperability
Blind and consultative call transfer
Call transfer attended and unattended
Basic call waiting
Delivery of calling number and name
Cancel call waiting
Activate/deactivate/interrogate call
waiting
Basic call waiting
Delivery of calling number and name
Cancel call waiting (1)
Activate/deactivate/interrogate call
waiting (1)
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
SIP SIP OMCIv2
mode 1 mode 2
Y Y Some parameter such as
contact_uri must be
configured on the ONT
using XML.
Y Y Fully configurable
— Y
— Y
— Y
— Y
— Y Reminder ring
cfwd_event_uri must be
Y Y
configured using XML.
Y Y Fully configurable
— Y
Y Y ETSI mode cannot be
configured using TL1.
— Y
— Y ETSI mode cannot be
configured using TL1.
— Y ETSI mode cannot be
configured using TL1.
Y — thin_client_HF_method is
only supported using XML.
Y Y Fully configurable
— Y
Y Y Fully configurable (except
for deactivation of call
Y Y
waiting on package C, D, E,
Y Y
F, and G ONTs)
Y Y
Y Y ETSI mode cannot be
configured using TL1.
Y Y
Y Y
Y Y
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
(2) and