Reboot Window; Tracing Omci And Protocol Traffic; Procedure 6-27 To Reboot A Package C Ont; Procedure 6-28 To Reboot A Package C Ont - Alcatel-Lucent 7302 Information Manual

Procedure 6-27 To reboot a Package C ONT

1 Select the Reboot option from the ONT Admin section of the navigation tree in the
GPON ONT window.
The Reboot window appears; see Figure 6-25.
2 Click Reset to reboot the system.
3 STOP. This procedure is complete.
Procedures using CLI interface for Package C ONTs
The following procedure provides the steps to reboot an ONT using the CLI interface
provided with Package C ONTs.

Procedure 6-28 To reboot a Package C ONT

1 Type R or r for Reboot from the
2 STOP. This procedure is complete.
Procedures using butt set
Not applicable.
6.13

Tracing OMCI and protocol traffic

Tracing is a logging of traffic to detect or resolve networking problems. Trace logs
are normally provided to support staff for troubleshooting. You can trace OMCI,
ARP, DHCP, or IGMP protocol traffic.
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
6 — ONT management using an ONT interface
Figure 6-25 Reboot window
SLID menu at any time during the session.
November 2013 6-43