Ntp 146-1: I-021G-P Indoor Ont Connections; Ntp 146-2: I-241G-Q Indoor Ont Connections - Alcatel-Lucent 7302 Information Manual

Figure
3 Replace the ONT with a new unit:
a
b
4 Connect the Ethernet cables to the RJ-45 ports (DLP 101).
5 For the I-241G-Q indoor ONT, connect the POTS cables to the RJ-11 ports
(DLP 123).
6 Connect the coaxial cable to the F-Type connector (DLP 116).
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
NTP 146 — Replace an I-021G-P or I-241G-Q indoor ONT
Figure NTP 146-1: I-021G-P indoor ONT connections
G E 1
NTP 146-2 shows the connections for an I-241G-Q indoor ONT.
Figure NTP 146-2: I-241G-Q indoor ONT connections
G E 2
G E 1
Ethernet
On a flat surface, such as a desk, substitute a replacement ONT for the old
ONT; go to step 4.
On a wall.
i Slide the old ONT off of the mounting screws until the ONT is free of the
wall.
ii Install the replacement ONT following the wall mounting instructions
for I-021G-P and I-241G-Q indoor ONTs (DLP 122).
R F
R E S E T
G E 2
Reset
button
Ethernet
ports
P O T S 2
P O T S 1
R F
G E 2
G E 1
F-Type
coaxial
ports
November 2013
Fiber optic
connector
P W R
Power
connector
F-Type
coaxial
21589
Fiber optic
connector
Power
P W R
R E S E T
connector
Reset
button
POTS
ports
22657
NTP 146-3