Ntp 124-1: I-010G-P Indoor Ont Connections; Ntp 124-2: I-020G-P Indoor Ont Connections - Alcatel-Lucent 7302 Information Manual

4 Place the indoor ONT unit:
a
b
5 Review the connection locations as shown in Figures
and
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
NTP 124 — Install an I-010G-P, I-020G-P, and an I-040G-P indoor ONT
On the flat surface, such as a desk, horizontally resting on its four feet as
shown in Figure NTP 124-1; go to step 5.
Note — The I-020G-P and I-040G-P cannot be stacked with another
ONT or with other equipment. The ONT mounting requirements are:
allow a minimum 100 mm clearance above the top cover
•
allow a minimum 50 mm clearance from the side vents
•
do not place any heat source directly above the top cover or below
•
the bottom cover
On a wall (DLP 122).
NTP 124-3.
Figure NTP 124-1: I-010G-P indoor ONT connections
Reset
R E S E T
G E
Ethernet
(GE)
RJ-45
Power
connector
Figure NTP 124-2: I-020G-P indoor ONT connections
G E
G E
Ethernet
(GE)
RJ-45
Power
connector
NTP 124-1,
P W R
P W R
November 2013
NTP 124-2,
20689
20687
NTP 124-3