NTP 118 — Install an I-010G-A indoor ONT
Recommended tools
The recommended tools for this DLP are:
•
#2 Phillips screwdriver
1/4 in. (6 mm) flat blade screwdriver
•
wire strippers
•
fiber optic splicing tools
•
RJ-45 cable plug crimp tool
•
•
voltmeter or multimeter
optical power meter
•
Procedure
Use this procedure to install I-010G-A indoor ONTs.
NTP 118-2
November 2013
Danger — Observe the local and national laws and regulations that
may be applicable to this installation.
Warning — This equipment is ESD sensitive. Proper ESD protections
should be used when handling the I-010G-A indoor ONT.
Caution — Keep the I-010G-A indoor ONT out of direct sunlight.
Prolonged exposure to direct sunlight can damage the unit.
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01
3FE 55873 AAAA TCZZA
ONT Product Information Guide