Ntp 100-2: B-0404-A In A Stand Mount - Alcatel-Lucent 7302 Information Manual

NTP 100 — Install a B-0404-A
c
NTP 100-4 November 2013
Figure NTP 100-2: B-0404-A in a stand mount
iii Go to step 6.
In a wall mount bracket.
i Measure and drill two holes in the wall where the ONT will be mounted.
The holes should be the same distance apart as the holes on the wall
mounting bracket (83.3 mm apart, or 3.28 in).
ii Align the holes in wall mount bracket with the holes in the wall.
iii Fasten the wall mount bracket to the wall with either screws or bolts.
iv Slide the ONT down over the mounting bracket until the fiber optic port
is directly in front of the fiber optic port cable lead built into the
bracket, as shown in Figure
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
NTP 100-3.
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
19869