NTP 110 — Replace a B-8102-A or
Purpose
This NTP provides the steps to replace an B-8102-A or B-8112-A business ONT.
General
The DLPs listed in this NTP describe mounting and cabling for the B-8102-A or B-8112-A
business ONT.
Prerequisites
See the listed DLPs for prerequisites.
Recommended tools
You need the following tools for replacing the ONT:
#2 Phillips screwdriver
•
1/4 in. (6 mm) flat blade screwdriver
•
1/8 in. (3 mm) flat blade screwdriver
•
•
type 216 hex bolt security wrench or
security wrench for pinned 5/32 in. (4 mm) Allen-type tamper-resistant screws
•
insulated side cutters
•
electrician's knife
•
wire stripper
•
fiber optic splicing tools
•
RJ-45 cable plug crimp tool
•
voltmeter or multimeter
•
optical power meter
•
•
drill and drill bits
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA
Edition 01
ONT Product Information Guide
B-8112-A ONT
November 2013
NTP 110-1