Procedure 6-33 To Specify Logging Option - Alcatel-Lucent 7302 Information Manual

6 — ONT management using an ONT interface

Procedure 6-33 To specify logging option

1 Choose option 9, Enable protocol traces, from the
following menu of options appears:
Please select protocol
===============
1. OMCI
2. DHCP
3. ARP
4. IGMP
5. Logging options
Enter choice :
2 Choose option 5, Logging options. The following menu of options appears:
===============
3 Choose one of the following actions for the system to take when the log file is full:
a
b
Press ↵ to continue. The
4
5 STOP. This procedure is complete.
6-50 November 2013
When log file size limit is reached, what do you want to do:
1. Append
2. Stop logging
Enter choice :
Choose option 1, Append, to create a second log file when the first log file
is full. The content of this second log file will be appended to the content of
the first log file when you view the log files, using Procedure 6-31.
Choose option 2, Stop logging, to create only one log file.
The following message appears:
Press enter key to continue...
Note — The log file is not permanently stored on the ONT, and can be
lost after an ONT is powered off and on, or is reset.
Secondary menu
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Secondary menu. The
appears.
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide