Veip Configuration Inputs - Alcatel-Lucent 7302 Information Manual

Task
Modify an ONT VEIP port
Delete an ONT VEIP port
(2 of 2)
Figure
Ext VLAN
PPTP
Tagging
POTS UNI
Oper
UNI-G
VEIP
UNI-G
PPTP
POTS UNI
VEIP
Figure
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
Restriction
After the ONT UNI port is created, you cannot modify the
association between an ONT UNI port and a QoS session profile. To
associate a new QoS session profile with the ONT UNI port, you
must first delete the ONT UNI port and re-create it.
The ONT UNI port must be in the out-of-service state to modify
any parameter other than customer information.
If you specify a new non-default DSCP to p-bit mapping profile,
the profile must exist.
To delete the ONT UNI port, the following is required:
•
•
5-6 shows VEIP configuration inputs.
Figure 5-6 VEIP configuration inputs
Priority
Queue A1
(Downstream)
Priority
Queue A2
(Downstream)
MAC Bridge
Port Config
Data
Priority
Queue A3
(Downstream)
MAC Bridge
Service
Priority Profile
Queue A4
(Downstream)
5-7 shows dual SIP upstream and downstream tagging.
All services and flows that are configured on the port must be
deleted.
The ONT UNI port must be in the out-of-service state.
VLAN
Tagging
Filter
802.1p
Mapper
Service
Profile
MAC Bridge
Port Config
Data
MAC Bridge
Port Config
802.1p
Data
Mapper
Service
Profile
VLAN
Tagging
Filter
November 2013
5 — VoIP overview
GEM
Interworking
TP
GEM
Interworking
TP
GEM
Interworking
TP
GEM
Interworking
TP
22218
5-17