Ntp 143-1: I-020E-B And I-020E-H Indoor Ont Connections; Ntp 143-2: I-020G-F Indoor Ont Physical Connections - Alcatel-Lucent 7302 Information Manual

3 Replace the indoor ONT with a new unit.
4 Reattach the power and Ethernet connections to the ONT.
5 Reconnect the power cable to the ac outlet.
6 If used, configure the SLID (DLP 6).
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
NTP 143 — Replace an I-020E-B, I-020E-H, or I-020G-F indoor ONT
Figure NTP 143-1: I-020E-B and I-020E-H indoor ONT connections
1
Ethernet cable
Figure NTP 143-2: I-020G-F indoor ONT physical connections
Invisible laser
radiation.
Avoid direct
exposure to beam.
PON
Fiber optic
port
Note — A new SLID or the old SLID may be used with the replacement
ONT. If a new SLID is used, the new SLID must also be programmed at
the P-OLT using TL1 or a network manager. If the old SLID is used, no
changes need to be made at the P-OLT; see the operations and
maintenance documentation for the OLT for more details.
Invisible laser
radiation.
Avoid direct
exposure to beam.
PON
2
Fiber
optic
cable
2 1
Ethernet Power
ports connection
November 2013
Power
cable
18793
20139
NTP 143-3