6 — ONT management using an ONT interface
Secondary menu
===============
Option selection
To choose an option from the main or secondary menu, type the number of the option
in the menu prompt Enter choice: and press ↵. If you enter an invalid option
number, the system responds with the message Unknown option and displays the
menu again.
CLI interface for Package C and Package K ONTs
The CLI interface for Package C and Package K ONTs is menu-driven, and consists
of two menus: the login menu and SLID menu. Each menu contains a number of
options from which you can choose. To navigate to the SLID menu, you must
successfully login. Following are the login and SLID menus.
login menu
<L>ogin
E<x>it
SLID menu
Retrieve<S>lid
<M>odify Slid
<R>eboot
E<x>it
Option selection
To choose an option from the login or SLID menu, type the letter (in either uppercase
or lowercase) in the option that appears between angle brackets (<>). For example,
to modify the SLID type either M or m in response to the <M>odify Slid menu
option.
6-8
November 2013
Figure 6-4 Secondary menu
1.
Retrieve firmware version
2.
Retrieve ONT status
3.
Retrieve uptime
4.
Retrieve ONT type
5.
Retrieve ONT serial number
6.
Retrieve ONT LED status
7.
Retrieve download progress
8.
Reboot ONT
9.
Enable tracing
10.
Upload traces
11.
Return to main menu
Enter choice :
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01
3FE 55873 AAAA TCZZA
ONT Product Information Guide