Procedure Using Http Interface For Package C Onts; Procedure 6-5 To Disconnect From The Cli Interface; Procedure 6-6 Login To Web-Based Gui - Alcatel-Lucent 7302 Information Manual

Procedure 6-5 To disconnect from the CLI interface

1 Choose option 9, Logout, from the main menu.
2 Perform one of the following:
a
b
3 STOP. This procedure is complete.

Procedure using HTTP interface for Package C ONTs

Package C ONTs support limited configuration using a web-based GUI. The ONT
must support an HTTP server, and the computer must have a supported HTTP client
(Web browser).
The following procedures provide the steps to access the HTTP interface.

Procedure 6-6 Login to web-based GUI

1 Open a web browser and enter the IP address of the ONT in the address bar.
The login window appears.
The default gateway IP address is http://192.168.50.101. You can also obtain the
IP address using DHCP after connecting your PC to the layer 3 UNI.
2 Enter your username and password in the Login window.
The default username is root while the default password is admin.
3 Click OK.
4 STOP. This procedure is complete.
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
If you are connected to the CLI interface through a craft port, disconnect the
serial cable from the RS-232 connector.
If you are connected to the CLI interface through the first Ethernet port,
disconnect the Ethernet cable from the first Ethernet port.
Note —
Contact your Alcatel-Lucent technical support
representative for a list of supported Web browsers.
Note — If you forget the current username and password, press the
reset button for 5 s and the default values for the username and
password will be recovered upon start up.
6 — ONT management using an ONT interface
November 2013 6-15