12 — G-010V-P unit data sheet
G-010V-P connections and components
G-010V-P ONTs are intended for deployment and can be installed horizontally or
vertically. These ONTs offer the following external interfaces:
•
one VDSL ports (RJ-45) to CPE
•
one VDSL ports (RJ-45) to the central office for use when the unit is not reverse
powered
•
one fiber optic port for SC/APC connectors
•
one power connection
•
one local management port
•
one external alarm connector
Figure
Power (RJ-45)
Table
Connection
VDSL ports
Fiber optic port
(1 of 2)
12-4
November 2013
12-1
show the physical connections for G-010V-P ONTs.
Figure 12-1 G-010V-P ONT connections
CO Line
(RJ-45)
C O L
VDSL and
Reverse
SC/APC
12-4
describes the physical connections on G-010V-P ONTs.
Table 12-4 G-010V-P ONT physical connections
(1)
Description
This connection is provided through a POTS RJ-45 port. One VDSL
connection is supported at a time. The VDSL connects to the CPE
through a PSE injector which provides reverse power to the unit.
The CO Line connector allows for the ONT to be configured before
being connected to the CPE and is active only when the unit is not
reverse powered.
This connection is provided through an SFF type laser fiber optic
cable with SC/APC connector and port with SC/APC adapter.
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
C O N
S O L
E
I N E
V D S
L
P O N
A L A
R M
Alarm
(RJ-45)
Edition 01
ONT Product Information Guide
Local
management
(RJ-45)
P O W
E R
Power
connector
23851
3FE 55873 AAAA TCZZA