Remove Motor Mounting Plate - Mfr30 - 80 - Maytag MFR Series Service Manual

ReMOve MOTOR MOunTinG plaTe - MFR30 - 80

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Remove the motor (See page 4-33).
2. Remove the four bolts from the triangular
corner brace at the back lower right corner
of the washer.
3. Remove the nut from the bolt and pull the
pivot bolt out of the motor mounting plate.
1 Nut
4. Remove the motor mounting plate from the
washer.
4 Bolts
4-34
Motor
Mounting Plate