Remove Facia - Pd; Remove Facia - Pn - Maytag MFR Series Service Manual

ReMOve FaCia - pD

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Remove eight T-20 screws from the front of
the control panel.
2. Remove the control panel from the washer.
3. Make sure to catch the display lens which is
not secured to the back of the control panel.
nOTe: Models prior to 2007 had threaded
posts passing through the control panel
with hex nuts securing them from inside the
control panel. Raise the top to access the
hex nuts.

ReMOve FaCia - pn

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Remove eight T-20 security screws.
2. The fascia will hang from the Emergency
Stop button at the left side of the control
panel.
4-3