Table of Contents
Advertisement
22.
To install the front bearing into the bearing
housing, place a thin film of Loctite® 603
around the front bearing seat in the housing,
not on the bearing. Apply only a thin layer,
otherwise the function of the bearing can be
affected.
23.
Assemble the tool #518878 with the
sleeve #518905, push bushing #518885 or
#518956 with the protruding side facing the
bearing. Insert the tool from the rear of the
bearing housing. Install the new bearing,
the push bushing #518884 or #518955 with
the protruding side toward the bearing, the
push bearing and the cog nut. Use the
lever bars #514759 to press the bearing into
position. Once started, apply continuous
pressure until the bearing is seated. Failure
to do so can result in an improperly seated
bearing.
Push Bushing
#518884
#518955
Cog Nut
Bearing
Push Bearing
24.
Verify the bearing is resting against the
bearing stop inside the bearing housing by
making sure that the entire snap ring groove
of the bearing housing is totally visible.
Sleeve
#518905
Push Bushing
#518885
#518956
Snap Ring
Groove
6-29
25.
To install the rear bearing into bearing
housing, make sure bearing seat is clean
and place a thin film of Loctite® 603 around
rear bearing seat in the housing, not on the
bearing. Apply only a thin layer, otherwise
the function of the bearing can be affected.
26.
Assemble the tool #518878 with the
sleeve #518905, push bushing #518885 or
#518956 with the protruding side facing the
bearing. Insert the tool from the front of the
bearing housing and seat the push bushing
into the front bearing inner race. Install the
new rear bearing, push bushing #518884
or #518955 with the protruding side toward
the bearing, the push bearing and the cog
nut. Use the lever bars #514759 to press
the rear bearing into position. Once started,
apply continuous pressure until the bearing
is seated. Failure to do so can result in an
improperly seated bearing.
Push Bushing
#518885
#518956
Sleeve
#518905
27.
Verify that the bearing is resting against
the bearing stop of the bearing housing
by looking through front bearing already
installed in the bearing housing.
Push Bearing
Cog
Nut
Bearing
Push Bushing
#518884
#518955
Advertisement
Table of Contents
Troubleshooting
