Remove The Tub Seal; Remove Motor Splash Guard - Maytag MAT14CS Service Manual

reMOve THe TuB SeaL

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Remove entire cabinet (see page 4-17).
2. Remove the agitator (see page 4-23).
3. Remove the tub ring (see page 4-24).
4. Remove the basket (see page 4-27).
5. Remove the tub. (see page 4-28).
6. Press the edge of the tub seal through the
tub opening to remove it from the bottom of
the tub.
reMOve MOTOr
SPLaSH GuarD
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Remove entire cabinet (see page 4-17).
2. Remove the agitator (see page 4-23).
3. Remove the tub ring (see page 4-24).
4. Remove the basket (see page 4-27).
5. Remove the tub (see page 4-28).
6. Remove the motor splash guard by pulling
the splash guard to dislodge the four tabs
that secure it to the base.
4 tabs
4-30