M10i Multiservice Edge Router Hardware Guide
Table 18: Field-Replaceable Units
Hot-Removable and
Hot-Insertable FRUs
Fan tray
Physical Interface Card
(PIC)
Redundant power supply
(AC or DC)
Small form-factor
pluggable (SFP)
Related
Documentation
Tools and Parts Required to Replace M10i Hardware Components
Table 19: Tools and Parts Required
Tool or part
Electrostatic bag or antistatic mat
Electrostatic discharge (ESD)
grounding wrist strap
Flat-blade (–) screwdriver, 2.5 mm
Needlenose pliers
100
All manuals and user guides at all-guides.com
Hot-Pluggable FRUs
Compact Forwarding
Engine Board (CFEB)
(when swapping for an
existing CFEB)
Enhanced Compact
Forwarding Engine Board
(CFEB-E) (when swapping
for an existing CFEB-E)
High-Availability Chassis
Manager (HCM)
Routing Engine
General Safety Guidelines for M Series, MX Series, and T Series Routers on page 147
General Safety Warnings for M Series, MX Series, and T Series Routers on page 148
Guidelines for Packing M10i Components for Shipment on page 215
M10i Router Description on page 3
Contacting Customer Support on page 212
To replace hardware components, you need the tools and parts listed in Table 19 on
page 100.
Components
CFEB/CFEB-E
HCM
PIC
Routing Engine
All
Serial cable to
port
CompactFlash card
FRUs that Require
Powering Off the Router
Nonredundant power
supply (AC or DC)
AC power cord or DC power
cable on a nonredundant
power supply (AC or DC)
AUX/MODEM
or
CONSOLE
Routing Engine
Copyright © 2010, Juniper Networks, Inc.