Omron SYSMAC CS1W-SCB41-V1 Operation Manual page 704

Visual Inspection System Protocol
Evaluation Condition Change (F200)
(Sequence No. 456 (Hex 01C8))
This sequence changes the upper and lower limit values of evaluation condition of the designated output No.
Send Data Word Allocation (3rd Operand of PMCR(260))
First word of send
data
Receive Data Word Allocation (4th Operand of PMCR(260))
None.
Note 1. Only one output No. can be designated.
2. Enter values so that upper limit ≥ lower limit.
3. Enter upper limit and lower limit values within the range –2147483.648 to 2147483.648.
Arbitrary Measurement Value Acquisition (F200)
(Sequence No. 457 (Hex 01C9))
This sequence stores measurement values of arbitrary measurement items regardless of output format in the
specified words.
Send Data Word Allocation (3rd Operand of PMCR(260))
First word of
send data
+0
Number of send data words
+1
(Undefined)
Output No.
+2
Decimal portion
(Undefined)
+3
Integer portion
+4
(Undefined)
+5 Sign
(Undefined)
+6 Decimal portion
(Undefined)
+7
Integer portion
+8
(Undefined)
+9 Sign (Undefined)
Offset Content (data format)
+0 Number of send data words
(4 digits Hex)
+1 Output No. (2 digits BCD)
+2 to +5 Upper limit value (decimal portion)
(3 digits BCD)
Upper limit value (integer portion)
(7 digits BCD)
Upper limit value (sign) (ASCII 2 digits)
+6 to +9 Lower limit value (decimal portion)
(3 digits BCD)
Lower limit value (integer portion)
(7 digits BCD)
Lower limit value (sign) (ASCII 2 digits)
+0
Number of send data words
+1
(Undefined)
(Undefined)
+2
Upper limit value
Lower limit value
000A (0010 decimal)
00 to 07
Example
–123.456
+2
+3
+4
+5
Same as upper limit.
Data 1
Data 2
Appendix O
Data
Example
+123.456
0567 +2 0678
1234 2345
+3
+4
0000 0001
+5
2D00 3000
675