Omron SYSMAC CS1W-SCB41-V1 Operation Manual page 442

C-mode (Host Link) Command Master
EM AREA WRITE (WE Command)
(Sequence No. 716 (Hex 02CC))
Writes the specified write data to the specified Host Link Unit starting from the designated EM Area word. Writ-
ing is done in word units.
Send Data Word Allocation (3rd Operand of PMCR(260))
Receive Data Word Allocation (4th Operand of PMCR(260))
Number of send data words
+0
First word of
send data
+1 (Undefined)
+2 (Undefined)
+3
First write word
+4 Number of write bytes
Write data
+5
Offset Contents (data format)
+0 Number of send data words
+1 (Undefined)
+2 (Undefined)
First write word (4 bits hex)
+3
+4 Number of write bytes
(4 digits hex)
Write data
+5
+6
Receive data +0 Number of receive data words
storage words
(Undefined)
+1
Offset Contents (data format)
Number of receive data words
+0
(Undefined)
+1
Host Link unit No.
Bank No.
0006 to 0022 hex (6 to 34 decimal)
Host Link unit 00 to 31
No.
(2 digits BCD)
Bank No. Current bank: Cannot be specified.
(2 digits hex) Bank specification: 00 to 0C hex
0000 to 9999
Specify the number of write bytes for
the communications line.
Note: The text data is converted into
ASCII on the communications line, so
specify twice the number of bytes of
text data bytes in S+5 onwards.
Sends the write data to the first write
word.
Sends the write data to the first write
word +1.
End code
Always 0002 hex (2 decimal)
End code The end code is stored in hexadecimal.
(2 digits hex)
Appendix C
Data
Data
413