Number Of Elements: 4 Digits Hex; Read Data; Variable Type "C0 - Omron SYSMAC CS1W-SCB41-V1 Operation Manual

CompoWay/F Master Protocol
Receive Data Word Allocation (4th Operand of PMCR(260))
None. (Specify a dummy value for the operand, such as #0000.)
Parameter Area Read
(Sequence No. 615 (Hex 0267))
This sequence reads the contents of the specified number of elements from the address of the specified
parameter area to the specified node number and stores the data starting at the specified word.
Send Data Word Allocation (3rd Operand of PMCR(260))
Receive Data Word Allocation (4th Operand of PMCR(260))
386
Offset Contents (data format)
+0 Number of send data words
+1 (Undefined)
+2 Variable type
(2 digits hex)
+3 First write address (6 digits BCD)
+4 Number of elements (4 digits BCD) Set the number of elements to write.
+5 Write data (4 digits hex)
Number of send data words
+0
First word of
send data
(Undefined)
+1
+2
Parameter type
+3
+4
Number of elements
Offset Contents (data format)
+0 Number of send data words
+1 (Undefined) Node No.
(2 digits BCD)
+2 Parameter type (4 digits hex)
+3 First read address (4 digits hex)
+4 Number of elements (4 digits hex)
Receive data
Number of receive data words
+0
storage words
Response code
+1
Variable type
+2
First read address
+3
+4 Number of elements

Read data

+5
Offset Contents (data format)
+0 Number of receive data words
+1 Response code (4 digits hex)
+2 Variable type (4 digits hex)
+4 First read address (4 digits hex)
+5 Read data (4 digits hex)
Always 0006 hex (6 decimal)
---
Set the area type (2 digits) and the first read
word (6 digits). The leftmost byte of the first write
address specifies the address and the rightmost
byte specifies the bit location. Set the rightmost
byte to 00 when bit access is not required.
Set the write data.
Node No.
First read address
Always 0006 hex (6 decimal)
00 to 99
Set the parameter type.
Set the first read address.
Set the number of elements to read.
(The leftmost bit in the number of elements is
always 1.)
0006 to 00FA Hex (6 to 250 decimal)
The CompoWay/F command response code is
stored in hexadecimal code.
The parameter type is stored in hexadecimal
code.
The first read address is stored in hexadecimal
code.
The read data is stored.
Appendix B
Data
Data
Data