Omron SYSMAC CS1W-SCB41-V1 Operation Manual page 687

3Z4L Laser Micrometer Protocol
Note This sequence cannot be used when DIP switch SW3, pin 5 of the Laser Micrometer is not turned ON.
Automatic Detection List Request (3000-series, High-speed
Type) (Sequence No. 429 (Hex 01AD))
This sequence requests the settings of work automatic detection function.
Send Data Word Allocation (3rd Operand of PMCR(260))
None.
Receive Data Word Allocation (4th Operand of PMCR(260))
Receive data
storage words
Note This sequence cannot be used when DIP switch SW3, pin 5 of the Laser Micrometer is not turned ON.
3Z4L Initialize (3000-series) (Sequence No. 430 (Hex 01AE))
This sequence clears the 3Z4L, sets the mm unit, sets memory switches, does not process statistics, and
clears the statistic memory.
Send Data Word Allocation (3rd Operand of PMCR(260))
The send data word allocation is similar to that of sequence No. 401 (Memory Switch Setting)
Receive Data Word Allocation (4th Operand of PMCR(260))
None.
Note Memory switch settings will be ignored for this sequence for 5000-series and 6000-series Laser
Micrometers.
658
+0 Number of receive data words
+1 (Undefined) The number of measuring times
+2 Invalid time
Decimal portion
+3
+4 (Undefined)
+5 Sign
+6
Decimal portion
(Undefined)
+7
Sign
+8
Offset Contents (data format)
+0 Number of receive data
words (4 digits Hex)
+1 The number of measuring
times
(3 digits BCD)
+2 Invalid time
(4 digits BCD)
+3 Detection lower limit (deci-
mal portion)
(4 digits BCD)
+4 Detection lower limit (integer
portion)
(3 digits BCD)
+5 Detection lower limit (Sign)
(BIN)
+6 to +8 Detection upper limit
Detection lower limit
Integer portion
(Undefined)
Detection upper limit
Integer portion
(Undefined)
0009 (fixed)
000 to 999
0001 to 9999
0000 to 9999
000 to 999
If +: 0
If –: F
Same as detection lower limit
Appendix N
Data
Example –123.4567
+3 4 5 6 7
+4 0 1 2 3
+5 F 0 0 0