Setup Area Allocations; Setup Area Words - Omron SYSMAC CS1W-SCB41-V1 Operation Manual

Setup Area Allocations

5-2 Setup Area Allocations
5-2-1

Setup Area Words

Serial Communications
Boards (CS Series Only)
Serial Communications
Units (CS/CJ Series)
Unit No.
Unit No. 0
Unit No. 1
Unit No. 2
Unit No. 3
Unit No. 4
Unit No. 5
Unit No. 6
Unit No. 7
Unit No. 8
Unit No. 9
Unit No. A
Unit No. B
Unit No. C
Unit No. D
Unit No. E
Unit No. F
This section explains the Setup Area allocated in the DM Area when a Serial
Communications Board or a Serial Communications Unit is used in protocol
macro mode.
The Serial Communications Board and Serial Communications Units use the
following words as a Setup Area in the DM Area when Protocol Macros are
used. The words allocated to the Serial Communications Board are different
from those allocated to the Serial Communications Units (which are allocated
words according to unit numbers).
Setup Area Allocated in the DM Area: D32000 to D32099
Words
D32000 to D32001
D32008 to D32009
D32010 to D32011
D32018 to D32019
D32002 to D32007
D32012 to D32017
D32020 to D32767
Setup Area Allocated in the DM Area: D30000 to D31599
First Word in Setup Area Allocated in the DM Area:
m = D30000 + 100 × unit number
DM Area
D30000 to D30099
D30100 to D30199
D30200 to D30299
D30300 to D30399
D30400 to D30499
D30500 to D30599
D30600 to D30699
D30700 to D30799
D30800 to D30899
D30900 to D30999
D31000 to D31099
D31100 to D31199
D31200 to D31299
D31300 to D31399
D31400 to D31499
D31500 to D31599
Usage
Port 1 Settings
Port 2 Settings
Not used with the protocol macro mode
Reserved for the system
m to m + 1, m + 8 to m + 9: Port 1 Settings
m + 10 to m + 11, m + 18 to m + 19: Port 2 Settings
m + 2 to m + 7, m + 12 to m + 17: Not used
m + 20 to m + 99: Not used
Section 5-2
153