Omron SYSMAC CS1W-SCB41-V1 Operation Manual page 208

Using Protocol Macros
Network Communications Flags
Communications Port
Enabled Flags
Communications Port
Error Flags
Communications Port
Completion Codes
The following table shows the Auxiliary Area flags that are used when the
PMCR(260) instruction is executed.
These flags turn ON when execution of the PMCR(260) instruction is enabled.
Depending on the PMCR(260) instruction, they turn OFF at execution, and
turn ON when the port enters an enabled status.
Word Bit
A202 08 to 15
07
06
05
04
03
02
01
00
These flags turn ON in the following cases:
• When an error occurs while the PMCR(260) instruction is being executed
• When an error response corresponding to each communications port
occurs, or a resend error occurs
When operations start or when the PMCR(260) instruction is executed, if the
Communications Port Enabled Flag turns OFF, then the corresponding Error
Flag also turns OFF.
Word Bit
A219 08 to 15
07
06
05
04
03
02
01
00
The response codes (FINS completion codes) are set when the PMCR(260)
instruction is executed. The contents of these words are also cleared when
the Communications Port Enabled Flag turns OFF at the start of operations or
when the PMCR(260) instruction is executed.
Word
A203 Communications Port No. 0 Completion Code
A204 Communications Port No. 1 Completion Code
A205 Communications Port No. 2 Completion Code
A206 Communications Port No. 3 Completion Code
A207 Communications Port No. 4 Completion Code
A208 Communications Port No. 5 Completion Code
A209 Communications Port No. 6 Completion Code
A210 Communications Port No. 7 Completion Code
A211 to A218 Reserved
Note Refer to 11-3-5 Protocol Macros for information on completion codes.
Contents
Reserved
Communications Port No. 7 Enabled Flag
Communications Port No. 6 Enabled Flag
Communications Port No. 5 Enabled Flag
Communications Port No. 4 Enabled Flag
Communications Port No. 3 Enabled Flag
Communications Port No. 2 Enabled Flag
Communications Port No. 1 Enabled Flag
Communications Port No. 0 Enabled Flag
Contents
Reserved
Communications Port No. 7 Error Flag
Communications Port No. 6 Error Flag
Communications Port No. 5 Error Flag
Communications Port No. 4 Error Flag
Communications Port No. 3 Error Flag
Communications Port No. 2 Error Flag
Communications Port No. 1 Error Flag
Communications Port No. 0 Error Flag
Contents
Section 5-4
179