Omron SYSMAC CS1W-SCB41-V1 Operation Manual page 116

Sysmac cs series; sysmac cj series. serial communications boards and serial communications units
Table of Contents

Advertisement

I/O Memory Allocations
No-protocol Mode Bits
Serial Communications
Units (CS/CJ Series)
Boards (CS Series only)
Port 1
Word
Bit
A356
07
06
05
00 to 04
A357
00 to 15
Port 1 and Port 2 Port Settings Change Bits
These bits can be turned ON from the program using the OUT or other
instructions to change communications settings and restart the Serial Com-
munications Unit ports. When changing the settings and restarting the port
have been completed, the bit will automatically be turned OFF. The port 1 or
port 2 Port Settings Change Bits and Restart Bits are allocated in the Auxiliary
Area according to the unit number as shown below.
Note These bits are used both to change the port settings and to restart the port at
the same time. One of these bits can be turned ON to restart a port without
changing the port settings in the Setup Area allocated in the DM Area. The
STUP(237) instruction can also be used to just restart a communications port
by executing STUP(237) with the same port settings as the ones already
being used.
Words
Bit
n
03 to 15
02
01
00
Unit
Unit No. 0
A62001
Unit No. 1
A62101
Unit No. 2
A62201
Unit No. 3
A62301
Unit No. 4
A62401
Unit No. 5
A62501
Unit No. 6
A62601
Unit No. 7
A62701
Unit No. 8
A62801
Unit No. 9
A62901
Port 2
Word
Bit
A356
15
Reception Overflow Flag
1: Board/Unit has received the specified
number of bytes or more
0: Board/Unit has not received the speci-
fied number of bytes or more
14
Reception Completed Flag
1: Reception completed; 0: No reception
or reception in progress
13
Send Ready Flag
1: Send enabled; 0: Send disabled
08 to 12
Reserved
A358
00 to 15
Receive counter (number of receive data
bytes)
The number of bytes of received data
between 0 and 256 bytes is indicated
using 0000 to 0100 hex.
Reserved
1: Port 2 Settings Change Bit
1: Port 1 Settings Change Bit
Reserved
Port 1 Settings Change Bit
Section 2-3
Contents
n = A620 + unit number
Contents
Port 2 Settings Change Bit
A62002
A62102
A62202
A62302
A62402
A62502
A62602
A62702
A62802
A62902
87

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents