Omron SYSMAC CS1W-SCB41-V1 Operation Manual page 483

Mitsubishi Computer Link Master (A-compatible 1C Frame, Model 1)
Device Memory Fill as Bit Data (All Device Types Except T/C)
(Sequence No. 808 (Hex 0328)) (Command Code: BW)
This sequence writes the bit data starting from the specified word + 6 in the CS/CJ-series CPU Unit to the
number of device points starting from the specified device address for the specified device type (except T, C) in
the Mitsubishi Computer Link Module with the specified station number (and the PLC number that follows).
Send Data Word Allocation (3rd Operand of PMCR(260))
Receive Data Word Allocation (4th Operand of PMCR(260))
454
Number of send data words
+0
First word of
send data Station No.
+1
+2 (Undefined)
Device No.
+3
+4
(Undefined)
+5
Number of send data bytes
+6
Write data
Offset Contents (data format)
+0 Number of send data words
(4 digits hex)
+1 Station No.
(2 digits hex)
+2 (Undefined)
+3 Device No. (4 digits hex)
+4 (Unde- Device words/bits
fined) (2 digits hex)
+5 Number of send data bytes
(4 digits hex)
+6 Write data (4 digits hex)
Number of receive data words
+0
Receive data
storage words
Station No.
+1
+2
Read data
Offset Contents (data format)
+0 Number of receive data words
+1 Station No.
(2 digits hex)
+2 Read data (4 digits hex)
PLC No.
Device type
Number of device words/bits
0007 to 00FA hex (7 to 250 decimal)
PLC No. Station No.: 00 to FF hex
(2 digits hex) PLC No.: 00 to FF hex
Device type Set the device type (2 characters) in
(2 digits hex) ASCII.
Set the first write address of the write
data.
Set the number of device words/bits to
write.
Specify the number of text data bytes
for the communications line (i.e., twice
the number of text bytes in S+6
onwards)
Set the write data.
PLC No.
0003 to 00FA hex (3 to 250 decimal)
PLC No. Station No.: 00 to FF hex
(2 digits hex) PLC No.: 00 to FF hex
Stores the number read data converted
into hexadecimal.
Appendix E
Data
Data