Omron SYSMAC CS1W-SCB41-V1 Operation Manual page 529

E5 @ K Digital Controller Write Protocol
Switch to Level 1 (Sequence No. 075 (Hex 004B))
Switches the setting level to level 1 (setup mode, extended mode). This sequence can be executed for multiple
units.
Send Data Word Allocation (3rd Operand of PMCR(260))
First word of
send data
Receive Data Word Allocation (4th Operand of PMCR(260))
None.
Software Reset (Sequence No. 076 (Hex 004C))
Resets the operation of the E5@K (equivalent to turning on the power supply). This sequence can be executed
for multiple units.
Send Data Word Allocation (3rd Operand of PMCR(260))
First word of
send data
Receive Data Word Allocation (4th Operand of PMCR(260))
None.
Note Communications with the E5@K are disabled for about five seconds after this sequence is executed.
500
+0
Number of send data words
Number of units
+1
+2 (Undefined)
Unit No.
+3
(Undefined)
Unit No.
~
+9 (Undefined)
Unit No.
Offset Contents (data format)
+0 Number of send data words
(4 digits Hex)
+1 Number of units (4 digits Hex)
+2 to 9 Unit No. (2 digits BCD)
+0 Number of send data words
+1 Number of units
(Undefined)
+2
(Undefined)
+3
~
+9
(Undefined)
Offset Contents (data format)
+0 Number of send data words
(4 digits Hex)
+1 Number of units (4 digits Hex)
+2 to 9 Unit No. (2 digits BCD)
~
(max.)
Number of units + 2
0001 to 0008
00 to 31
Unit No.
Unit No.
~
Unit No. (max.)
Number of units + 2
0001 to 0008
00 to 31
Appendix G
Data
Data