Omron SYSMAC CS1W-SCB41-V1 Operation Manual page 642

Sysmac cs series; sysmac cj series. serial communications boards and serial communications units
Table of Contents

Advertisement

K3T @ Intelligent Signal Processor Protocol
Appendix L
Read Set Value L with Bank (Continuous Units)
(Sequence No. 325 (Hex 0145))
This sequence reads set value L of a bank not in use for continuous units. The word allocation is identical to
that of sequence No. 323 (Read Set Value HH with Bank (Continuous Units)).
Read Set Value LL with Bank (Continuous Units)
(Sequence No. 326 (Hex 0146))
This sequence reads set value LL of a bank not in use for continuous units. The word allocation is identical to
that of sequence No. 323 (Read Set Value HH with Bank (Continuous Units)).
Read Set Value O5 with Bank (Continuous Units)
(Sequence No. 327 (Hex 0147))
This sequence reads set value O5 of a bank not in use for continuous units. The word allocation is identical to
that of sequence No. 323 (Read Set Value HH with Bank (Continuous Units)).
Read Set Value O4 with Bank (Continuous Units)
(Sequence No. 328 (Hex 0148))
This sequence reads set value O4 of a bank not in use for continuous units. The word allocation is identical to
that of sequence No. 323 (Read Set Value HH with Bank (Continuous Units)).
Read Set Value O3 with Bank (Continuous Units)
(Sequence No. 329 (Hex 0149))
This sequence reads set value O3 of a bank not in use for continuous units. The word allocation is identical to
that of sequence No. 323 (Read Set Value HH with Bank (Continuous Units)).
Read Set Value O2 with Bank (Continuous Units)
(Sequence No. 330 (Hex 014A))
This sequence reads set value O2 of a bank not in use for continuous units. The word allocation is identical to
that of sequence No. 323 (Read Set Value HH with Bank (Continuous Units)).
Read Set Value O1 with Bank (Continuous Units)
(Sequence No. 331 (Hex 014B))
This sequence reads set value O1 of a bank not in use for continuous units. The word allocation is identical to
that of sequence No. 323 (Read Set Value HH with Bank (Continuous Units)).
Read Holding Data (Sequence No. 332 (Hex 014C))
Reads the peak/bottom data (maximum, minimum) and stores the results in the specified words.
613

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents