Enter Tool Data Into The Table - HEIDENHAIN TNC 620 User Manual

5
Programming: Tools
5.2 Tool data

Enter tool data into the table

You can define and store up to 32,767 tools and their tool data in
a tool table. Also see the editing functions later in this chapter.
In order to be able to assign various compensation data to a tool
(indexing the tool number), insert a line and extend the tool number
by a dot and a number from 1 to 9 (e.g. T 5.2).
You must use tool tables if
If you wish to use indexed tools such as stepped drills with
more than one length compensation value
If your machine has an automatic tool changer
If you want to apply fine roughing with machining Cycle 22
Further information:
If you want to work with machining Cycles 251 to 254,
Further information:
If you create or manage further tool tables, the file
name has to start with a letter.
You can select either a list view or form view for
tables using the Screen Layout key.
When you open the tool table you can also change
its layout
176
Cycle Programming User's Manual
Cycle Programming User's Manual
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015