Resetting the TCPM FUNCTION
FUNCTION RESET TCPM is to be used if you want
to purposely reset the function within a program.
The TNC automatically resets TCPM FUNCTION if you
select a new program in a program run mode.
You can reset the TCPM FUNCTION only if the PLANE
function is inactive. If required, run PLANE RESET
before FUNCTION RESET TCPM.
Example NC blocks
...
25 FUNCTION RESETTCPM
...
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015
FUNCTION TCPM
Reset TCPM FUNCTION
12
12.5
461